| Model | PH-F140D30R_DRGB_PWM_BK01 |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | 250–1800 RPM |
| Max airflow | 71.76 CFM |
| Max pressure | 3.08 mmH₂O |
| Max noise | 32.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-140 Reversed is a 140 mm 30 mm fan rated 250-1800 RPM with 71.76 CFM and 3.08 mmH2O at 32.1 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks D30-140 Reversed 140mm Reverse D-RGB Fan
The D30-140 Reversed runs from 250 to 1800 RPM and pushes 71.76 CFM with 3.08 mmH2O of static pressure. That balance suits buyers pushing air through radiators, mesh front panels or dense dust filters, where pressure matters as much as raw flow. At full speed Phanteks rates it at 32.1 dB(A), so expect audible airflow at 1800 RPM and a quieter result near the 250 RPM floor. The data does not list a price or release year.
Its 30 mm thickness is deeper than a standard 25 mm fan, so check clearance at the mounting location before buying. The fluid dynamic bearing is rated by the manufacturer for long-life operation, though the data does not list an MTBF figure. A 4-Pin PWM daisy-chain connector lets several fans share one header, and the separate 3-Pin JST D-RGB lead handles the ARGB lighting. The reversed blade design is intended for pull or intake orientations, and the black frame keeps the build clean.
Frequently asked questions
Is the Phanteks D30-140 Reversed quiet at full speed?
Phanteks rates it at 32.1 dB(A) at its 1800 RPM maximum, so it is audible under load. The 250 RPM minimum lets you run it slower for a quieter result, though the data does not list noise at lower speeds.
What is the D30-140 Reversed best used for?
With 71.76 CFM and 3.08 mmH2O static pressure, it suits radiator, mesh panel and filtered intake setups where pressure is needed. The reversed blade design targets pull or intake mounting positions in a build.
Will the 30 mm thickness and connectors fit my case?
The 140 mm frame is 30 mm thick, deeper than standard 25 mm fans, so verify clearance. It uses a 4-Pin PWM daisy-chain connector plus a 3-Pin JST D-RGB lead for the ARGB lighting, so plan both cable routes.















