| Model | Tranquil 120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 400–2000 RPM |
| Max airflow | 59.23 CFM |
| Max pressure | 2.46 mmH₂O |
| Max noise | 28.6 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Antec Tranquil 120 is a 120 mm 25 mm fan rated 400-2000 RPM with 59.23 CFM and 2.46 mmH2O at 28.6 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Tranquil 120 120mm PWM Fan
The Antec Tranquil 120 balances airflow and pressure for a 120mm fan. Its 59.23 CFM airflow suits open case ventilation and rear or top exhaust, while the 2.46 mmH2O static pressure gives it enough push for heatsinks and radiators with tighter fin spacing. Buyers choosing between the two figures should treat it as a general-purpose fan rather than a pressure-optimised specialist.
Noise is rated at 28.6 dB(A) at the top 2000 RPM speed, so expect the fan to be audible at full tilt and quieter toward the 400 RPM minimum. The 25mm thickness and 120mm diameter fit standard mounts, and the 4-pin PWM connector allows motherboard speed control. The fluid dynamic bearing is the listed bearing type, and the fan is black with no lighting. The data does not list a price or release year.
Frequently asked questions
Is the Antec Tranquil 120 quiet at full speed?
Antec rates the fan at 28.6 dB(A) at its 2000 RPM maximum. It can run as low as 400 RPM via the 4-pin PWM connector, so lower speeds should reduce noise, though the data does not list a separate figure for them.
Is the Antec Tranquil 120 best for a case or a radiator?
It offers 59.23 CFM airflow and 2.46 mmH2O static pressure. That combination suits general case ventilation and light radiator or heatsink use, but the data does not include benchmarks, so it is not positioned as a pressure-only specialist.
Does the Antec Tranquil 120 have RGB lighting and what size is it?
No, the fan is listed as black with no lighting. It is a 120mm diameter fan with 25mm thickness and a 4-pin PWM connector, so it fits standard 120mm mounts and motherboard fan headers.













