| Model | PH-F120M25_G2_DBK01 _3P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2000 RPM |
| Max airflow | 72.72 CFM |
| Max pressure | 2.51 mmH₂O |
| Max noise | 35.13 dBA |
| Bearing | Hydraulic Bearing |
| Connector | Linq6 (PWM + D-RGB) |
| Lighting | ARGB |
| Colour | Black |
Phanteks M25G2-120 is a 120 mm 25 mm fan rated 350-2000 RPM with 72.72 CFM and 2.51 mmH2O at 35.13 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks M25G2-120 120mm D-RGB Fan 3-Fan Pack
The M25G2-120 balances airflow and pressure for a 120mm fan. Its 72.72 CFM airflow suits open case ventilation and mesh-front intakes, while the 2.51 mmH2O static pressure gives it enough push for radiators and dense dust filters. The 350 to 2000 RPM range lets you tune between near-silent idle running and full-speed cooling, and the top-end noise figure is 35.13 dB(A), so expect audible airflow only when the fan runs near maximum.
Each fan is 120mm wide and 25mm thick, the standard size for most case and cooler mounts. The hydraulic bearing is rated for long-term use, though the data does not list an hours figure. Connection uses a single Linq6 connector carrying PWM and D-RGB, so the fans need a compatible Phanteks controller or header rather than separate cables. ARGB lighting is included in black. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25G2-120 3-fan pack quiet?
The rated noise is 35.13 dB(A) at maximum 2000 RPM. Because the fans start at 350 RPM, you can run them well below full speed for quieter operation, but the data does not list noise at lower speeds.
Is the M25G2-120 better for radiators or case airflow?
It works for both. The 2.51 mmH2O static pressure suits radiators and filters, while 72.72 CFM airflow suits case intake and exhaust. The 25mm thickness fits standard 120mm mounts.
What connector do the M25G2-120 D-RGB fans use?
Each fan uses a Linq6 connector that carries both PWM control and D-RGB lighting. You need a compatible Phanteks controller or header, and the data does not list an adapter for standard 4-pin PWM plus separate ARGB headers.














