| Model | P12 PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1400 RPM |
| Max airflow | 60.4 CFM |
| Max pressure | 1.29 mmH₂O |
| Max noise | 34.49 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Antec P12 PWM is a 120 mm 25 mm fan running up to 1400 RPM with 60.4 CFM and 1.29 mmH2O at 34.49 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec P12 PWM 120mm PWM Fan
The Antec P12 PWM 120mm balances airflow and pressure for a general-purpose case fan. Its 60.4 CFM rating at 1400 RPM suits open case ventilation and rear or top exhaust duty, while the 1.29 mmH2O static pressure is modest, so it is a better fit for unobstructed airflow paths than for dense radiators or thick dust filters. Buyers pushing air through restrictive fins should expect the pressure figure to matter more than the CFM number.
Noise is listed at 34.49 dB(A) at maximum speed, so expect audible operation when the fan runs flat out; PWM control lets the 4-pin header slow it for quieter idle periods. The 120mm diameter and 25mm thickness fit standard 120mm mounts, and the hydraulic bearing is the stated bearing type. Lighting is not included and the colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Antec P12 PWM 120mm quiet?
Antec lists noise at 34.49 dB(A), which is the maximum-speed figure in the data. Because it uses a 4-pin PWM connector, you can lower the speed through motherboard control for quieter running, but the data does not give noise at reduced RPM.
What is the Antec P12 PWM 120mm best for?
With 60.4 CFM airflow and 1.29 mmH2O static pressure at 1400 RPM, it suits case ventilation and exhaust positions. The modest pressure rating means dense radiators and restrictive filters are not its strongest use case according to the listed numbers.
Does the Antec P12 PWM 120mm have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It is a plain 120mm fan with a 4-pin PWM connector and hydraulic bearing, so it will not add addressable or RGB lighting to a build.














