| Size | 120 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 350–2000 RPM |
| Max airflow | 72.72 CFM |
| Max pressure | 2.51 mmH₂O |
| Max noise | 35.13 dBA |
| Bearing | Hydraulic Bearing |
| Connector | Linq6 (PWM + D-RGB) |
| Lighting | ARGB |
| Colour | White |
Phanteks M25G2-120 is a 120 mm 25 mm fan rated 350-2000 RPM with 72.72 CFM and 2.51 mmH2O at 35.13 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks M25G2-120 120mm D-RGB Fan White
The Phanteks M25G2-120 White runs from 350 to 2000 RPM and moves 72.72 CFM at a static pressure of 2.51 mmH2O. That combination suits buyers who need both open-case airflow and pressure against a radiator or dense mesh filter, since the pressure figure is high enough to push air through restriction rather than only across an empty intake. At full speed Phanteks rates noise at 35.13 dB(A), so expect audible airflow at 2000 RPM and a quieter result near the 350 RPM minimum.
The frame is 120 mm across and 25 mm thick, the standard size for most case and cooler mounts, and the hydraulic bearing is listed for long-term use. The single Linq6 connector carries both PWM control and D-RGB, so the fan needs a header or controller that accepts Linq6 rather than a separate 4-pin PWM and 3-pin ARGB pair. Lighting is ARGB in a white frame. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25G2-120 quiet at full speed?
Phanteks rates it at 35.13 dB(A) at its 2000 RPM maximum, so it is audible under load. The 350 RPM minimum gives a much quieter option when full airflow is not needed.
Is this fan better for a radiator or a case intake?
It lists 2.51 mmH2O static pressure and 72.72 CFM airflow, so it can serve either role. The pressure figure makes it a reasonable fit for radiators and filtered intakes where airflow alone is not enough.
What connector does the M25G2-120 use for PWM and RGB?
It uses a single Linq6 connector that carries both PWM and D-RGB, so your motherboard or controller must support Linq6 rather than separate 4-pin PWM and 3-pin ARGB headers.














