| Model | HD25QA1225MAB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1500 RPM |
| Max airflow | 37.2 CFM |
| Max pressure | 1.03 mmH₂O |
| Max noise | 27.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Vision 120R ARGB is a 120 mm 25 mm fan rated 800-1500 RPM with 37.2 CFM and 1.03 mmH2O at 27.5 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Vision 120R ARGB 120mm Reverse ARGB Fan
The Antec Vision 120R ARGB is a 120mm by 25mm reverse-blade fan running from 800 to 1500 RPM. Its 37.2 CFM airflow paired with 1.03 mmH2O static pressure puts it in balanced territory rather than a dedicated radiator or heatsink fan, so it suits case intake and exhaust duty where moderate pressure is enough. Buyers pushing through dense fins or filters should weigh that 1.03 mmH2O figure carefully.
Noise is rated at 27.5 dB(A) at the top of its range, so expect a moderate rather than silent character at 1500 RPM, with the 800 RPM floor offering a quieter option. The hydraulic bearing is listed for reduced wear over time. Mounting is standard 120mm with 25mm thickness, and the 4-pin PWM plus 3-pin ARGB connectors mean a PWM header and an ARGB header are both needed. The data does not list a price or release year.
Frequently asked questions
Is the Antec Vision 120R ARGB quiet at full speed?
Antec rates it at 27.5 dB(A) at its 1500 RPM maximum, which is a moderate noise level rather than a silent one. Dropping to the 800 RPM minimum via PWM should reduce noise further, though the data does not list a separate low-speed figure.
What is the Antec Vision 120R ARGB best used for?
With 37.2 CFM and 1.03 mmH2O, it is a balanced fan suited to case intake and exhaust. Its static pressure is modest, so the data suggests it is less ideal for pushing air through dense radiator fins or restrictive filters.
What connectors and size does the Antec Vision 120R ARGB need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It requires a 4-pin PWM header for speed control and a separate 3-pin ARGB header for the ARGB lighting, so your motherboard or controller needs both.















