| Model | HD25PA1225MAB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 44.5 CFM |
| Max pressure | 1.36 mmH₂O |
| Max noise | 29 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Vision 120 ARGB is a 120 mm 25 mm fan rated 800-1800 RPM with 44.5 CFM and 1.36 mmH2O at 29 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Vision 120 ARGB 120mm ARGB Fan
The Antec Vision 120 ARGB 120mm runs from 800 to 1800 RPM, so it can idle quietly and still spin up when a case needs more movement. Its 44.5 CFM airflow suits open case ventilation and rear or top exhaust positions, while the 1.36 mmH2O static pressure is modest, so it is a better fit for unobstructed airflow paths than for dense radiators or thick dust filters. Buyers should treat it as an airflow-first fan.
At 29 dB(A) at its top speed, expect audible movement when the fan is pushed, with quieter running toward the 800 RPM floor. The 25 mm thickness and 120 mm diameter match standard case and cooler mounts. The 4-pin PWM connector allows speed control from a motherboard header, and the separate 3-pin ARGB connector needs an ARGB header or controller. The hydraulic bearing is listed; the data does not list a price or release year.
Frequently asked questions
Is the Antec Vision 120 ARGB 120mm quiet?
Antec rates it at 29 dB(A), with a minimum speed of 800 RPM and a maximum of 1800 RPM. Lower PWM speeds should reduce noise, but the listing gives no separate noise figure for the minimum speed.
Is this fan better for case airflow or radiators?
It lists 44.5 CFM airflow and 1.36 mmH2O static pressure, so it is oriented toward case airflow. The modest static pressure makes it less suited to dense radiators or restrictive filters than to open intake and exhaust positions.
What connectors does the Antec Vision 120 ARGB 120mm need?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller therefore needs both a PWM fan header and an ARGB header to use speed control and lighting.















