| Model | C120 ARGB_3PK |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1500 RPM |
| Max airflow | 65.08 CFM |
| Max pressure | 1.7 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Connect 120 ARGB is a 120 mm 25 mm fan rated 800-1500 RPM with 65.08 CFM and 1.7 mmH2O at 28 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Connect 120 ARGB 120mm ARGB Fan 3-Pack
The Antec Connect 120 ARGB 3-Pack gives buyers a balanced 120mm fan rather than a pressure-first design. At 65.08 CFM it moves a healthy volume of air for case intake and exhaust, while 1.7 mmH2O static pressure is modest, so it suits open case airflow better than dense radiators or thick dust filters. The 800 to 1500 RPM range lets you tune speed, and the rated 28 dB(A) at maximum is the figure to expect when the fan runs at full tilt.
Each fan is 120mm across and 25mm thick, the standard size for most case mounts and many coolers, so fit is straightforward. The 4-pin PWM connector handles speed control from the motherboard, and the separate 3-pin ARGB connector drives the lighting, so your board needs an ARGB header or controller. Hydraulic bearings are listed for longevity. The data does not list a price or release year, so check the retailer for current pricing on the three-pack.
Frequently asked questions
Is the Antec Connect 120 ARGB quiet at full speed?
Antec rates the fan at 28 dB(A), which is the noise figure at its 1500 RPM maximum. The 800 RPM minimum should run quieter, but the data does not list a separate noise value for lower speeds.
Is this fan better for case airflow or a radiator?
It is better suited to case airflow. The 65.08 CFM airflow is strong, but 1.7 mmH2O static pressure is modest, so dense radiators and restrictive filters may not be its best use.
What connectors does the 3-pack need?
Each fan uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs a matching ARGB header to run the lighting.















