| Model | C120R ARGB_3PK |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 43.2 CFM |
| Max pressure | 1.29 mmH₂O |
| Max noise | 27.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Connect 120 Reverse ARGB is a 120 mm 25 mm fan rated 800-1800 RPM with 43.2 CFM and 1.29 mmH2O at 27.2 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Connect 120 Reverse ARGB 120mm Reverse ARGB Fan 3-Pack
The Antec Connect 120 Reverse ARGB 3-Pack uses 120mm by 25mm fans rated from 800 to 1800 RPM, delivering 43.2 CFM of airflow against 1.29 mmH2O of static pressure. That balance suits case ventilation and low-restriction mesh or grille positions better than dense radiators or thick filters, where higher static pressure usually matters more. The 27.2 dB(A) rating is the manufacturer figure at its tested condition, so expect the low end of the 800-1800 RPM range to be the quieter setting.
Each fan connects through a 4-pin PWM header for speed control plus a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs both. The hydraulic bearing is the stated bearing type, and the black frame with ARGB lighting is the listed colour and lighting spec. The data does not list a price, release year, included controller, or per-fan cable length, so confirm those with the retailer before buying the three-pack.
Frequently asked questions
Is the Antec Connect 120 Reverse ARGB 3-Pack quiet?
Antec rates these fans at 27.2 dB(A) with a range of 800 to 1800 RPM. The 800 RPM minimum gives you a lower-speed option, but the data does not state the exact RPM or test setup behind the 27.2 dB(A) figure.
What is the Antec Connect 120 Reverse ARGB best for?
With 43.2 CFM airflow and 1.29 mmH2O static pressure at up to 1800 RPM, it suits case ventilation and low-restriction mounting. Dense radiators or heavy filters typically call for higher static pressure than the listed 1.29 mmH2O.
Does the Antec Connect 120 Reverse ARGB fit my case and motherboard?
It is a 120mm fan that is 25mm thick, so it fits standard 120mm mounts with 25mm clearance. It needs one 4-pin PWM header and one 3-pin ARGB connector per fan; the data does not list cable lengths or an included ARGB controller.















