| Model | P12 ARGB White |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1500 RPM |
| Max airflow | 60.63 CFM |
| Max pressure | 1.33 mmH₂O |
| Max noise | 26.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Antec P12 ARGB is a 120 mm 25 mm fan rated 600-1500 RPM with 60.63 CFM and 1.33 mmH2O at 26.5 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec P12 ARGB 120mm ARGB Fan White
The Antec P12 ARGB 120mm Fan White runs from 600 to 1500 RPM and delivers 60.63 CFM of airflow with 1.33 mmH2O of static pressure. That balance suits case ventilation and airflow-focused builds, while the modest static pressure means dense radiators or heavily restricted intakes are not its strongest use case. At a rated 26.5 dB(A), expect a moderate noise level rather than near-silent operation, so fan curves and low-RPM running matter for quiet systems.
The 25 mm thickness fits standard 120 mm mounts, and the hydraulic bearing is the only bearing type listed. A 4-pin PWM connector handles speed control, while a separate 3-pin ARGB connector drives the lighting, so your motherboard or controller needs an ARGB header. The data does not list a price or release year, so check the retailer for current pricing before buying.
Frequently asked questions
Is the Antec P12 ARGB 120mm Fan White quiet?
Antec rates it at 26.5 dB(A) at up to 1500 RPM. That is a moderate noise figure, so expect audible airflow at full speed; running it closer to its 600 RPM minimum will be quieter.
What is the Antec P12 ARGB 120mm Fan White best for?
With 60.63 CFM airflow and 1.33 mmH2O static pressure, it suits case ventilation and airflow-focused builds. Its modest static pressure makes it less ideal for dense radiators or heavily restricted intakes.
What connectors does the Antec P12 ARGB 120mm Fan White need?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller therefore needs both a PWM fan header and an ARGB header.














