| Model | P12R ARGB White |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1500 RPM |
| Max airflow | 61.46 CFM |
| Max pressure | 1.07 mmH₂O |
| Max noise | 29.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Antec P12R ARGB is a 120 mm 25 mm fan rated 600-1500 RPM with 61.46 CFM and 1.07 mmH2O at 29.5 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec P12R ARGB 120mm Reverse ARGB Fan White
The Antec P12R ARGB 120mm Reverse Fan White is a 120mm, 25mm-thick case fan running from 600 to 1500 RPM. Its 61.46 CFM airflow is the headline figure, while 1.07 mmH2O static pressure is modest, so it suits open case ventilation and low-restriction mesh or filter positions better than dense radiators or heatsinks. Buyers pushing air through thick fins should expect the pressure rating to be the limiting factor.
At full speed the rated noise is 29.5 dB(A), so expect audible airflow at 1500 RPM and quieter running near the 600 RPM floor. The hydraulic bearing is listed without an MTBF figure, and the data does not list a price or release year. Mounting is standard 120mm, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header on the motherboard or controller. The white frame and ARGB lighting are confirmed; the reverse-blade orientation is implied by the product name only.
Frequently asked questions
Is the Antec P12R ARGB 120mm Reverse Fan White quiet?
Antec rates it at 29.5 dB(A) at its 1500 RPM maximum. It can drop to 600 RPM via 4-pin PWM, so you can trade airflow for lower noise, but the data lists no noise figure for that lower speed.
What is the Antec P12R ARGB 120mm Reverse Fan White best for?
With 61.46 CFM and 1.07 mmH2O static pressure, it fits low-restriction case intake and exhaust positions. The modest pressure rating makes it a weaker match for dense radiators or tightly finned heatsinks.
What connectors and size does the Antec P12R ARGB 120mm Reverse Fan White need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector for lighting, so both headers are required.















