| Model | PH-F140M25_G2_BBK01_3P |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 350–1800 RPM |
| Max airflow | 101.78 CFM |
| Max pressure | 2.23 mmH₂O |
| Max noise | 36.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM Daisy-chain |
| Lighting | None |
| Colour | Black |
Phanteks M25G2-140 is a 140 mm 25 mm fan rated 350-1800 RPM with 101.78 CFM and 2.23 mmH2O at 36.4 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks M25G2-140 140mm PWM Fan 3-Fan Pack
The M25G2-140 balances high airflow with usable static pressure. Its 101.78 CFM rating at 1800 RPM suits open case ventilation and mesh-front intakes, while the 2.23 mmH2O figure means it can still push through filters and moderately restrictive grilles. Buyers with dense radiators or thick heatsinks should weigh that pressure number against the airflow figure rather than assuming one fan covers every mount.
Noise is rated at 36.4 dB(A) at maximum speed, so expect the loudest operation near 1800 RPM; the 350 RPM minimum gives a much quieter floor for idle tuning. The 140 mm diameter and 25 mm thickness fit standard 140 mm mounts, and the 4-Pin PWM daisy-chain connector lets multiple fans share a header. Lighting is not included, the colour is black, and the data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25G2-140 quiet at full speed?
Phanteks rates this fan at 36.4 dB(A) at its 1800 RPM maximum, so full speed is the loudest point. The 350 RPM minimum allows much lower, quieter operation when your PWM curve is tuned down.
Is the M25G2-140 better for case airflow or radiators?
It lists 101.78 CFM airflow and 2.23 mmH2O static pressure. The high airflow favours case intake and exhaust, while the moderate pressure can handle filters and grilles; dense radiators are not specifically rated in the data.
Does the M25G2-140 3-Fan Pack include RGB lighting?
No. The manufacturer data lists lighting as none, and the fans are black. Each fan uses a 4-Pin PWM daisy-chain connector, so the pack is aimed at airflow and cooling rather than illuminated builds.














