| Model | PH-F140M25_DRGB_PWM_BK01 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 104.62 CFM |
| Max pressure | 2.8 mmH₂O |
| Max noise | 36.57 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks M25-140 is a 140 mm 25 mm fan rated 500-1800 RPM with 104.62 CFM and 2.8 mmH2O at 36.57 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks M25-140 140mm D-RGB Fan
The M25-140 balances high airflow with strong static pressure, which makes it a flexible choice for a 140mm case fan or a radiator fan. Its 104.62 CFM airflow figure suits open case ventilation, while the 2.8 mmH2O rating gives it enough push to work through a radiator or dense mesh filter. The 500–1800 RPM PWM range lets you tune speed to the task, and the 36.57 dB(A) figure is the maximum noise at full speed, so expect quieter running at lower RPM.
The 25 mm thickness is standard for 140mm mounts, and the 4-pin PWM daisy-chain connector plus 3-pin D-RGB header means you can link fans and control lighting from a compatible motherboard or controller. The hydraulic bearing is listed for long-term use, and the black frame with ARGB lighting suits most builds. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Phanteks M25-140 140mm D-RGB quiet?
The listed noise figure is 36.57 dB(A) at its 1800 RPM maximum. The 500 RPM minimum and PWM control let you run it slower for lower noise, but the data does not list noise at intermediate speeds.
What is the M25-140 best used for?
With 104.62 CFM airflow and 2.8 mmH2O static pressure, it suits both case ventilation and radiator or heatsink mounting. The 140mm size and 25mm thickness fit standard 140mm fan mounts.
Does the M25-140 have RGB and what connector does it use?
Yes, it has ARGB lighting. It uses a 4-pin PWM daisy-chain connector for fan power and a separate 3-pin D-RGB header for lighting, so it needs a compatible motherboard or controller.














