| Size | 140 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 104.62 CFM |
| Max pressure | 2.8 mmH₂O |
| Max noise | 36.57 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin D-RGB |
| Lighting | ARGB |
| Colour | White |
Phanteks M25-140 is a 140 mm 25 mm fan rated 500-1800 RPM with 104.62 CFM and 2.8 mmH2O at 36.57 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks M25-140 140mm D-RGB Fan White
The Phanteks M25-140 balances high airflow with strong static pressure. Its 104.62 CFM rating suits open case ventilation and mesh-front intakes, while the 2.8 mmH2O static pressure figure means it can also push air through radiators and dense dust filters without stalling. Buyers choosing between the two use cases can treat this as a flexible 140mm option rather than a pressure-only or airflow-only design.
Speed runs from 500 to 1800 RPM, so low-load operation is possible, but the rated 36.57 dB(A) at maximum is a figure to expect at the top end rather than a quiet-room guarantee. The 25mm thickness fits standard 140mm mounts. A 4-Pin PWM daisy-chain connector simplifies linking fans, and the separate 3-Pin D-RGB header drives the ARGB lighting. The hydraulic bearing is listed; the data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25-140 quiet at full speed?
The manufacturer lists 36.57 dB(A) as the noise figure, which is the rated maximum rather than a low-speed measurement. With a 500 RPM minimum, you can run it slower for less noise, but the data does not list noise at other speeds.
Is the M25-140 better for a radiator or case airflow?
It suits both. The 104.62 CFM airflow favours case intake and exhaust, while the 2.8 mmH2O static pressure supports radiator and filter use. The data does not list radiator-specific performance, so treat those figures as the guide.
What connectors does the white M25-140 D-RGB use?
It uses a 4-Pin PWM daisy-chain connector for fan power and speed control, plus a separate 3-Pin D-RGB connector for the ARGB lighting. The 140mm diameter and 25mm thickness fit standard 140mm fan mounts.














