| Model | HF120 ARGB UCHF12PARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1600 RPM |
| Max airflow | 72.1 CFM |
| Max pressure | 1.98 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
HF120 ARGB UCHF12PARGB is a 120 mm 25 mm white fan rated 500-1600 RPM 72.1 CFM and 1.98 mmH2O 27 dBA
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax HF120 ARGB White Fan
The Enermax HF120 ARGB White is a 120mm by 25mm fan running from 500 to 1600 RPM. Its 72.1 CFM airflow suits open case ventilation and rear or top exhaust, while the 1.98 mmH2O static pressure is modest, so it is a better fit for low-restriction mesh and grille positions than for thick radiators or dense dust filters. Buyers should treat it as an airflow-first fan.
The 27 dB(A) rating is the manufacturer figure at its specified condition, so expect audible movement near 1600 RPM and quieter running toward the 500 RPM floor. The hydraulic bearing is listed without an hours rating, and the data does not list a price or release year. Mounting uses standard 120mm 25mm screw spacing, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header on the motherboard or controller.
Frequently asked questions
Is the Enermax HF120 ARGB White quiet enough for a bedroom PC?
The manufacturer lists 27 dB(A) as the noise figure, with a 500 RPM minimum and 1600 RPM maximum. Running near the lower end should be quieter, but the data does not give noise at specific speeds, so set a PWM curve to suit your tolerance.
Is this fan better for a case or a radiator?
It is airflow-oriented. The 72.1 CFM airflow is strong for case intake and exhaust, but the 1.98 mmH2O static pressure is modest, so thick radiators and dense filters are not its ideal use. Mesh and open grille positions suit it better.
What connectors and size does the HF120 ARGB White need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for fan control plus a separate 3-pin ARGB connector for lighting, so your board or controller needs both headers.















