| Model | METAL 120 PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1950 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.82 mmH₂O |
| Max noise | 26 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM daisy-chain |
| Lighting | None |
| Colour | Black |
METAL 120 PWM is a 120 mm 25 mm black fan rated 800-1950 RPM 69 CFM and 2.82 mmH2O 26 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH METAL 120 PWM Fan
The MONTECH METAL 120 PWM is a 120mm by 25mm fan built around a balance of airflow and pressure. Its 69 CFM airflow suits open case ventilation, while the 2.82 mmH2O static pressure figure makes it a reasonable candidate for pushing air through dense heatsinks or mesh filters where resistance is higher. The 800 to 1950 RPM range is controlled through a 4-pin PWM daisy-chain connector, so multiple fans can share a header chain where the board supports it.
Noise is rated at 26 dB(A), which buyers should read as a manufacturer figure at an unspecified operating point rather than a guarantee at full 1950 RPM. The hydraulic bearing is the only bearing type listed. Lighting is not included, and the fan is black. The data does not list a price or release year, so check current retail listings before buying.
Frequently asked questions
Is the MONTECH METAL 120 PWM quiet?
Montech rates it at 26 dB(A), but the data does not state the RPM at which that figure is measured. Expect the 800 RPM minimum to be quieter than the 1950 RPM maximum, though no per-speed noise values are listed.
Is this fan better for airflow or static pressure?
It lists 69 CFM airflow and 2.82 mmH2O static pressure. The pressure figure supports use on heatsinks and filters, while the airflow figure suits case ventilation. The data does not include comparative benchmarks, so match it to your restriction level.
Does the MONTECH METAL 120 PWM have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It uses a 4-pin PWM daisy-chain connector, so lighting control is not part of its specification. Check your motherboard header count for daisy-chaining.















