| Model | HF120 ARGB UCHF12PARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1600 RPM |
| Max airflow | 72.1 CFM |
| Max pressure | 1.98 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
HF120 ARGB UCHF12PARGB is a 120 mm 25 mm black fan rated 500-1600 RPM 72.1 CFM and 1.98 mmH2O 27 dBA
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax HF120 ARGB Black Fan
The Enermax HF120 ARGB Black is a 120mm, 25mm-thick fan running from 500 to 1600 RPM through a 4-pin PWM connector. Its 72.1 CFM airflow figure points to case ventilation and open-airflow mounting, while the 1.98 mmH2O static pressure is modest, so dense radiators and restrictive filters are not its strongest use case. Buyers should treat it as an airflow-first fan.
At 27 dB(A) maximum, the HF120 sits in a middle range for 1600 RPM fans, and PWM control lets it drop to 500 RPM for quieter idle running. The hydraulic bearing is listed as the bearing type. ARGB lighting runs on a separate 3-pin ARGB connector, so you need both PWM and ARGB headers on your board or controller. The data does not list a price or release year, so check current retail listings for cost.
Frequently asked questions
Is the Enermax HF120 ARGB Black quiet?
The manufacturer rates it at 27 dB(A) at its 1600 RPM maximum. Because it uses 4-pin PWM and starts at 500 RPM, you can lower the speed for quieter running, but the data lists no noise figure for lower speeds.
Is the HF120 ARGB Black best for case airflow or radiators?
Its 72.1 CFM airflow is the stronger number, while 1.98 mmH2O static pressure is modest. That makes it a reasonable choice for case ventilation and low-restriction mounting rather than thick, dense radiators.
What connectors does the Enermax HF120 ARGB Black need?
It uses a 4-pin PWM connector for fan power and speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs both a PWM fan header and an ARGB header to use it fully.















