| Model | Lynx LN120P IW-FN-LN120P-3PK |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 900–2200 RPM |
| Max airflow | 61.2 CFM |
| Max pressure | 3.04 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Sleeve Bearing |
| Connector | Type-C + 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Lynx LN120P IW-FN-LN120P-3PK is a 120 mm 28 mm white fan rated 900-2200 RPM 61.2 CFM and 3.04 mmH2O 25.5 dBA
More InWin fans · All 120mm models · Browse the full fan database
About the InWin Lynx LN120P 3-Pack White Fan
The Lynx LN120P pairs 61.2 CFM of airflow with 3.04 mmH2O of static pressure, so it is a balanced choice rather than a pure airflow fan. That pressure figure suits radiators and dense mesh or filter intakes, while the airflow keeps open case ventilation covered. The 900–2200 RPM range lets you trade cooling headroom for acoustics, and the rated 25.5 dB(A) is the manufacturer's noise figure at its specified operating point.
At 28 mm thick, the fan is slightly deeper than a standard 120 mm frame, so check clearance at the mounting location. The Type-C plus 4-pin PWM plus 3-pin ARGB connector setup means PWM speed control and addressable lighting need the matching headers or controller. The sleeve bearing is a simple, low-cost bearing type. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the InWin Lynx LN120P quiet enough for a low-noise build?
InWin rates it at 25.5 dB(A), with a 900 RPM minimum and 2200 RPM maximum. The minimum speed gives you a lower-noise option, but the data does not specify the RPM at which the 25.5 dB(A) figure was measured.
What is the Lynx LN120P best used for?
With 61.2 CFM airflow and 3.04 mmH2O static pressure, it suits both case ventilation and pressure-demanding spots such as radiators or filtered intakes. The 28 mm thickness means you should confirm clearance before mounting.
Does the InWin Lynx LN120P 3-Pack include ARGB lighting and PWM control?
Yes. Each fan uses a 4-pin PWM connector for speed control and a 3-pin ARGB connector for addressable lighting, plus Type-C. You need a compatible ARGB header or controller. The data does not list a price for the three-fan pack.














