| Model | Lynx LN120 IW-FN-LN120-3PK |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 900–2200 RPM |
| Max airflow | 61.2 CFM |
| Max pressure | 3.04 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Sleeve Bearing |
| Connector | Type-C + 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Lynx LN120 IW-FN-LN120-3PK is a 120 mm 28 mm black fan rated 900-2200 RPM 61.2 CFM and 3.04 mmH2O 25.5 dBA
More InWin fans · All 120mm models · Browse the full fan database
About the InWin Lynx LN120 3-Pack Fan
The Lynx LN120 balances airflow and pressure for a 120mm fan. Its 61.2 CFM airflow suits open case ventilation, while the 3.04 mmH2O static pressure is the figure to watch when air must push through a radiator, dense mesh or a restrictive filter. The 900 to 2200 RPM range lets a buyer trade cooling headroom for lower speed, and the rated 25.5 dB(A) is the manufacturer's noise figure to expect near the top of that range.
At 28mm thick, these fans are deeper than standard 25mm models, so check clearance at the mounting point before buying. The sleeve bearing is a simple, low-cost design, and the data does not list a rated lifespan. Each fan uses a 4-pin PWM connector for speed control plus a 3-pin ARGB header and Type-C link, with ARGB lighting in black. The data does not list a price or release year for this 3-pack.
Frequently asked questions
Is the InWin Lynx LN120 3-Pack quiet?
InWin rates each fan at 25.5 dB(A) at up to 2200 RPM. Because the range starts at 900 RPM, running lower speeds should reduce noise, but the data lists only the single 25.5 dB(A) figure, not per-speed values.
Is the Lynx LN120 best for radiators or case airflow?
It works for both, but its 3.04 mmH2O static pressure makes it a stronger fit for radiators, dense mesh and filters where pressure matters. The 61.2 CFM airflow also supports general case ventilation at up to 2200 RPM.
Will the Lynx LN120 fit my case and motherboard?
The fans are 120mm wide and 28mm thick, so confirm your case or radiator has room for the extra depth over 25mm fans. Each uses a 4-pin PWM connector plus a 3-pin ARGB header, and the pack includes a Type-C link.















