| Model | SquA RGB UCSQARGB12P-W-SG |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 300–1500 RPM |
| Max airflow | 68.27 CFM |
| Max pressure | 1.898 mmH₂O |
| Max noise | 23 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
SquA RGB UCSQARGB12P-W-SG is a 120 mm 26 mm white fan rated 300-1500 RPM 68.27 CFM and 1.898 mmH2O 23 dBA
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax SquA RGB 120 White Fan
The Enermax SquA RGB 120 White is a 120mm fan with a 26mm thickness, so it fits standard 120mm case and cooler mounts while leaving a little extra room for its ARGB frame. Its 68.27 CFM airflow at up to 1500 RPM suits open case ventilation and rear or top exhaust, while the 1.898 mmH2O static pressure is modest, so it is better placed as a case fan than pushed through dense radiators or thick filters. The 300 RPM minimum lets it idle slowly.
At full speed the rated noise is 23 dB(A), which suggests a fairly quiet fan, though the data does not list a measured noise at lower speeds. It uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB header for lighting, so your motherboard needs both. The hydraulic bearing is listed, but the data does not list a price, release year or warranty.
Frequently asked questions
Is the Enermax SquA RGB 120 White quiet?
Enermax rates it at 23 dB(A) at its maximum 1500 RPM, and the 300 RPM minimum lets it run slower. The data does not list noise levels at intermediate speeds, so real-world quietness at low RPM is not specified.
What is the SquA RGB 120 White best used for?
With 68.27 CFM airflow and 1.898 mmH2O static pressure, it suits case intake and exhaust rather than high-resistance radiators. Its 120mm size and 26mm thickness fit standard 120mm mounting points.
Does the Enermax SquA RGB 120 White need two headers?
Yes. It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both a PWM fan header and an ARGB header.















