| Model | Lynx LN140 IW-FN-LN140-3PK |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 900–1800 RPM |
| Max airflow | 89.14 CFM |
| Max pressure | 3.07 mmH₂O |
| Max noise | 29.7 dBA |
| Bearing | Sleeve Bearing |
| Connector | Type-C + 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Lynx LN140 IW-FN-LN140-3PK is a 140 mm 25 mm black fan rated 900-1800 RPM 89.14 CFM and 3.07 mmH2O 29.7 dBA
More InWin fans · All 140mm models · Browse the full fan database
About the InWin Lynx LN140 3-Pack Fan
The Lynx LN140 balances high airflow and strong static pressure in one 140mm frame. Its 89.14 CFM rating suits open case ventilation and mesh-front builds, while the 3.07 mmH2O figure indicates enough push for radiators and dense heatsinks. Buyers choosing between airflow and pressure fans do not need to pick a side here.
Noise is rated at 29.7 dB(A) at the top 1800 RPM, with a 900 RPM floor for quieter idle running. The 25mm thickness fits standard 140mm mounts, and each fan uses a 4-pin PWM connector for speed control plus a 3-pin ARGB header for lighting, with Type-C also listed. The sleeve bearing is a basic, cost-conscious design. The data does not list a price or release year.
Frequently asked questions
Is the InWin Lynx LN140 3-Pack quiet enough for a low-noise build?
InWin rates it at 29.7 dB(A) at up to 1800 RPM. The minimum speed is 900 RPM, so PWM control lets you run it slower for quieter operation, though the data does not list noise at lower speeds.
Is the Lynx LN140 better for case airflow or radiators?
It offers both: 89.14 CFM of airflow for case ventilation and 3.07 mmH2O of static pressure for radiators and dense heatsinks. The 140mm size and 25mm thickness suit standard 140mm case and cooler mounts.
What connectors does the InWin Lynx LN140 need?
Each fan lists a 4-pin PWM connector for speed control, a 3-pin ARGB connector for lighting, and Type-C. You will need a compatible ARGB header or controller on your motherboard or hub to use the lighting.















