| Model | GF120 ARGB PWM 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1600 RPM |
| Max airflow | 66.3 CFM |
| Max pressure | 1.55 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
GF120 ARGB PWM 3in1 is a 120 mm 25 mm black fan rated 800-1600 RPM 66.3 CFM and 1.55 mmH2O 25.5 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH GF120 ARGB PWM 3-in-1 Pack Fan
The MONTECH GF120 ARGB PWM is a 120mm fan with a 25mm thickness, so it fits standard 120mm case and cooler mounts. Its 66.3 CFM airflow at up to 1600 RPM suits open case ventilation and low-restriction mesh intakes, while the 1.55 mmH2O static pressure is modest, so buyers pushing air through dense radiators or thick filters should expect less effective performance than from a high-pressure design. The 800 RPM minimum lets the fan idle slowly under PWM control.
Noise is rated at 25.5 dB(A), which is the manufacturer figure at its specified operating point rather than a measured room level. The hydraulic bearing is listed as the bearing type. Connection is a 4-pin PWM header plus a separate 3-pin ARGB header, so your motherboard or controller needs both. The data does not list a price or release year. Colour is black, and the SKU is GF120 ARGB PWM 3in1.
Frequently asked questions
Is the MONTECH GF120 ARGB PWM a quiet fan?
Montech rates it at 25.5 dB(A), with a minimum speed of 800 RPM and a maximum of 1600 RPM. That figure is the manufacturer's noise rating, so actual loudness depends on the speed your PWM curve sets.
Is the GF120 ARGB PWM better for case airflow or radiators?
Its 66.3 CFM airflow is the stronger number, while static pressure is 1.55 mmH2O. That makes it a reasonable choice for case ventilation and low-restriction intakes, but dense radiators and thick filters favour higher-pressure fans.
What connectors and size does the MONTECH GF120 ARGB PWM need?
It is a 120mm fan that is 25mm thick, with a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both headers.















