| Model | PH-F120M25_DRGB_PWM_BK01_3P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 84.26 CFM |
| Max pressure | 2.67 mmH₂O |
| Max noise | 35.7 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks M25-120 is a 120 mm 25 mm fan rated 500-2000 RPM with 84.26 CFM and 2.67 mmH2O at 35.7 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks M25-120 120mm D-RGB Fan 3-Fan Pack
The M25-120 covers both airflow and pressure duties with 84.26 CFM and 2.67 mmH2O at up to 2000 RPM, so it suits case intake and exhaust as well as radiators and heatsinks where pressure matters. At the 500 RPM minimum it can run slowly, but the data lists only the 35.7 dB(A) maximum figure, so lower-speed noise is not stated. Buyers should expect the loudest point at full speed.
Mounting is standard 120mm by 25mm, fitting common case and cooler positions. Each fan uses a 4-Pin PWM daisy-chain connector plus a 3-Pin D-RGB header, so the three fans can share PWM control and addressable lighting. The hydraulic bearing is listed for longevity, though the data does not give an MTBF or warranty. Colour is black, lighting is ARGB, and the data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25-120 quiet at low RPM?
The data lists 35.7 dB(A) as the noise figure and a 500 RPM minimum, but it does not state noise at lower speeds. Treat 35.7 dB(A) as the listed maximum rather than a low-speed expectation.
Is the M25-120 better for case airflow or radiators?
It lists 84.26 CFM airflow and 2.67 mmH2O static pressure, so it can serve case intake and exhaust as well as pressure-restricted spots like radiators. The data gives no performance benchmarks beyond these figures.
What connectors and size does the 3-fan pack need?
Each fan is 120mm diameter and 25mm thick, with a 4-Pin PWM daisy-chain connector plus a 3-Pin D-RGB header for ARGB lighting. Your case needs standard 120mm mounts and a compatible D-RGB header.















