| Model | PH-F120M25_G2_DBK01 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2000 RPM |
| Max airflow | 72.72 CFM |
| Max pressure | 2.51 mmH₂O |
| Max noise | 35.13 dBA |
| Bearing | Hydraulic Bearing |
| Connector | Linq6 (PWM + D-RGB) |
| Lighting | ARGB |
| Colour | Black |
Phanteks M25G2-120 is a 120 mm 25 mm fan rated 350-2000 RPM with 72.72 CFM and 2.51 mmH2O at 35.13 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks M25G2-120 120mm D-RGB Fan
The Phanteks M25G2-120 balances airflow and pressure for a 25 mm thick 120 mm frame. Its 72.72 CFM airflow suits open case ventilation, while 2.51 mmH2O static pressure makes it a reasonable candidate for radiators and dense mesh or filter intakes where resistance is higher. The 350 to 2000 RPM range lets you tune between low-speed running and maximum output.
At full 2000 RPM Phanteks rates noise at 35.13 dB(A), so expect the fan to be audible at the top end; lower RPM should reduce that, though the data does not list noise at other speeds. The hydraulic bearing is specified for long-term use. Mounting is standard 120 mm with 25 mm thickness, and the Linq6 connector carries PWM plus D-RGB, so plan for a compatible Phanteks header or adapter. The data does not list price or release year.
Frequently asked questions
Is the Phanteks M25G2-120 quiet at full speed?
Phanteks rates it at 35.13 dB(A) at its 2000 RPM maximum, so it is audible at full speed. The data does not list noise levels at lower RPM, but the 350 RPM minimum gives headroom to run it slower.
Is the M25G2-120 better for airflow or radiators?
It offers 72.72 CFM airflow and 2.51 mmH2O static pressure. The pressure figure makes it usable on radiators and filtered intakes, while the airflow suits general case ventilation. The data does not include radiator-specific performance figures.
What connector does the M25G2-120 use for PWM and RGB?
It uses a Linq6 connector that carries both PWM and D-RGB, with ARGB lighting in black. You need a compatible Phanteks header or adapter, since the data does not list a standard 4-pin PWM plus separate ARGB setup.















