| Model | PH-F140D30_DRGB_PWM_BK01_3P |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | 250–1800 RPM |
| Max airflow | 71.93 CFM |
| Max pressure | 3.32 mmH₂O |
| Max noise | 29.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-140 is a 140 mm 30 mm fan rated 250-1800 RPM with 71.93 CFM and 3.32 mmH2O at 29.5 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks D30-140 140mm D-RGB Fan 3-Fan Pack
The D30-140 pairs a 30mm thick frame with a 250-1800 RPM range, delivering 71.93 CFM of airflow and 3.32 mmH2O of static pressure. That static pressure figure makes it a sensible pick for pushing air through radiators, dense mesh or restrictive front panels, while the airflow rating keeps it viable as a general case fan. At full speed Phanteks rates it at 29.5 dB(A), so expect the loudest operation at 1800 RPM and quieter running toward the 250 RPM floor.
Mounting uses standard 140mm spacing, and the 30mm thickness means you should confirm clearance behind brackets and in tight top or front positions. Each fan connects via a 4-Pin PWM daisy-chain plus a 3-Pin JST D-RGB header, so plan for both PWM and ARGB cabling. The Fluid Dynamic Bearing is listed for long-term use. Colour is black with ARGB lighting. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks D30-140 quiet at low RPM?
Phanteks rates the fan at 29.5 dB(A) at its 1800 RPM maximum, and the minimum speed is 250 RPM. The data does not list noise at lower speeds, so the 29.5 dB(A) figure represents the loudest rated point.
Is the D30-140 better for radiators or case airflow?
It offers both 71.93 CFM airflow and 3.32 mmH2O static pressure. The static pressure suits radiators and restrictive panels, while the airflow figure keeps it usable as a general case fan in 140mm mounts.
What connectors does the D30-140 3-Fan Pack need?
Each fan uses a 4-Pin PWM daisy-chain connector plus a 3-Pin JST D-RGB connector for the ARGB lighting. You need both a PWM fan header and an ARGB header, and the 30mm thickness should be checked for clearance.















