| Model | PH-F140T30_BG |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | –2500 RPM |
| Max airflow | 140 CFM |
| Max pressure | 5.41 mmH₂O |
| Max noise | 44.3 dBA |
| Bearing | Magnetic Levitation (VAPO) |
| Connector | 4-Pin PWM Daisy-chain |
| Lighting | None |
| Colour | Grey |
Phanteks T30-140 is a 140 mm 30 mm fan rated 0-2500 RPM with 140 CFM and 5.41 mmH2O at 44.3 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks T30-140 140mm PWM Fan
The Phanteks T30-140 is a 140 mm fan with a 30 mm thick frame, and that extra depth supports its high-pressure design. Its 5.41 mmH2O static pressure rating makes it a natural fit for heatsinks, radiators and other restrictive airflow paths, while the 140 CFM maximum airflow figure means it can also move serious air as a case fan. Buyers should note the 44.3 dB(A) maximum noise rating, which reflects operation at the full 2500 RPM rather than at lower speeds.
Mounting uses standard 140 mm fan spacing, but the 30 mm thickness is worth checking against tight clearances in cases, brackets and radiator stacks. The 4-Pin PWM daisy-chain connector lets multiple fans share a single header connection. The bearing is listed as magnetic levitation (VAPO), and the fan ships in grey with no lighting. The manufacturer data does not list a price or release year, so check a retailer for current pricing.
Frequently asked questions
Is the Phanteks T30-140 quiet?
The listed maximum noise is 44.3 dB(A), measured at the fan's top 2500 RPM speed. The data does not include noise figures for lower PWM speeds, so expect quieter operation when the fan is run below maximum.
What is the Phanteks T30-140 best for?
With 5.41 mmH2O static pressure and 140 CFM airflow, it suits radiators, heatsinks and other restrictive setups, and can also serve as a high-airflow case fan. The 30 mm thickness should be checked against your clearance.
Does the Phanteks T30-140 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is grey. It uses a 4-Pin PWM daisy-chain connector, so any lighting would need to come from separate components in your build.















