| Model | PH-F140D30_DRGB_PWM_BK01 |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | 250–1800 RPM |
| Max airflow | 71.93 CFM |
| Max pressure | 3.32 mmH₂O |
| Max noise | 29.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-140 is a 140 mm 30 mm fan rated 250-1800 RPM with 71.93 CFM and 3.32 mmH2O at 29.5 dBA
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks D30-140 140mm D-RGB Fan
The D30-140 pairs a 30mm frame with a 250–1800 RPM range, so it can idle quietly and still push 71.93 CFM at full speed. Its 3.32 mmH2O static pressure is the number to watch if you are mounting it on a radiator or a dense dust filter, where pressure matters more than raw airflow. In open case positions the airflow figure is the more relevant one.
Phanteks rates noise at 29.5 dB(A), which is the figure to expect near maximum RPM rather than at the 250 RPM floor. The Fluid Dynamic Bearing is the stated bearing type. Wiring is a 4-Pin PWM daisy-chain plus a 3-Pin JST D-RGB connector for the ARGB lighting, so plan for both headers. The data does not list a price or release year, and the 140mm diameter with 30mm thickness should be checked against your case or radiator clearance before buying.
Frequently asked questions
Is the Phanteks D30-140 quiet at low RPM?
The fan spans 250 to 1800 RPM, and Phanteks rates noise at 29.5 dB(A). That figure is the published rating, so expect the quietest operation near the 250 RPM minimum and the rated level toward maximum speed.
Is the D30-140 better for radiators or case airflow?
It offers 71.93 CFM airflow and 3.32 mmH2O static pressure. The higher pressure figure suits radiators and restrictive filters, while the airflow rating covers open case mounting. Both values come from Phanteks data, not independent testing.
What connectors does the D30-140 need?
It uses a 4-Pin PWM daisy-chain connector for fan power and a 3-Pin JST D-RGB connector for the ARGB lighting. You need both a PWM fan header and an addressable RGB header, and the 30mm thickness should be checked for clearance.















