| Model | VENTO 120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 45.3 CFM |
| Max pressure | 0.68 mmH₂O |
| Max noise | 21 dBA |
| Bearing | Sleeve Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
VENTO 120 is a 120 mm 25 mm black fan rated 1200 RPM 45.3 CFM and 0.68 mmH2O 21 dBA
More XPG fans · All 120mm models · Browse the full fan database
About the XPG VENTO 120 Fan
The XPG VENTO 120 is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. It runs at a fixed 1200 RPM, delivering 45.3 CFM of airflow against 0.68 mmH2O of static pressure. That balance suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick heatsinks, where higher static pressure is usually wanted. The rated noise is 21 dB(A), a modest figure for a 1200 RPM fan, though the data does not list a measured test result.
A sleeve bearing is specified, which is a simpler bearing type than fluid dynamic designs, and the data does not list a rated lifespan or warranty. The 3-pin connector means speed is controlled by voltage rather than PWM, so check whether your motherboard header supports DC control. There is no lighting, and the colour is black. Price and release year are not listed in the data provided, so compare retailer listings before buying.
Frequently asked questions
Is the XPG VENTO 120 quiet enough for a bedroom PC?
The manufacturer rates it at 21 dB(A) at its fixed 1200 RPM. That is a modest figure, but the data does not include measured test results, so actual noise in your case will depend on mounting and airflow restriction.
Is the XPG VENTO 120 good for a radiator or CPU heatsink?
It offers 45.3 CFM airflow and 0.68 mmH2O static pressure. That balance is better suited to case ventilation and low-restriction grilles than dense radiators or thick heatsinks, which typically benefit from higher static pressure.
What connector and size does the XPG VENTO 120 use?
It is a 120mm fan with a 25mm thickness and a 3-pin connector, so it fits standard 120mm mounts. Because it is 3-pin rather than 4-pin PWM, confirm your motherboard header supports voltage speed control.














