| Model | VENTO 120 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 45.3 CFM |
| Max pressure | 0.68 mmH₂O |
| Max noise | 23 dBA |
| Bearing | Sleeve Bearing |
| Connector | 3-pin + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
VENTO 120 ARGB is a 120 mm 25 mm black fan rated 1200 RPM 45.3 CFM and 0.68 mmH2O 23 dBA with ARGB lighting
More XPG fans · All 120mm models · Browse the full fan database
About the XPG VENTO 120 ARGB Fan
The XPG VENTO 120 ARGB runs at a fixed 1200 RPM, moving 45.3 CFM with 0.68 mmH2O of static pressure. That balance suits case ventilation and low-restriction mesh or open-frame setups better than dense radiators or thick dust filters, where higher pressure is usually wanted. Because the speed is fixed, there is no PWM range to tune, so the 23 dB(A) rating is the figure to plan around.
Mounting follows the standard 120mm by 25mm format, so it fits common 120mm case and cooler positions. The 3-pin fan connector plus a separate 3-pin ARGB connector means the lighting needs an ARGB header or controller, and speed control depends on voltage rather than PWM. The bearing is a sleeve type and the frame is black. The manufacturer data does not list a price or release year.
Frequently asked questions
Is the XPG VENTO 120 ARGB quiet?
XPG rates it at 23 dB(A) at its fixed 1200 RPM. That is the only noise figure the manufacturer lists, and since the fan has no PWM range, it does not run slower or quieter than that.
What is the XPG VENTO 120 ARGB best for?
With 45.3 CFM and 0.68 mmH2O static pressure, it suits case ventilation and low-restriction airflow positions. Dense radiators or heavy filters typically call for higher static pressure than this fan's rating.
Does the XPG VENTO 120 ARGB need a special header?
It uses a 3-pin fan connector plus a separate 3-pin ARGB connector. The ARGB lighting therefore needs an ARGB header or controller, and speed is controlled by voltage rather than PWM.














