| Model | Saturn 12 FRGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1000–1000 RPM |
| Max airflow | 35.8 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 19.6 dBA |
| Bearing | Hydraulic Bearing |
| Connector | Molex + 3-pin |
| Lighting | RGB |
| Colour | Black |
Saturn 12 FRGB is a 120 mm 25 mm black fan rated 1000 RPM 35.8 CFM and 1.31 mmH2O 19.6 dBA with RGB lighting
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Saturn 12 FRGB Fan
The AeroCool Saturn 12 FRGB is a 120mm, 25mm-thick fan that runs at a single fixed speed of 1000 RPM, so there is no PWM ramp to tune. Its 35.8 CFM airflow and 1.31 mmH2O static pressure sit in a balanced range: it moves reasonable air through open case areas and mesh panels, but the modest pressure figure means it is not the strongest choice for dense radiators or heavily restricted front intakes. Buyers should treat it as a general case or exhaust fan rather than a high-impedance cooling solution.
Noise is rated at 19.6 dB(A), which suggests a low-noise character at its fixed speed, though the data does not list measured results in real systems. The hydraulic bearing is specified for longer service life than sleeve designs. Mounting uses standard 120mm spacing at 25mm thickness, and the Molex plus 3-pin connector lets it run directly from a power supply or a motherboard header. RGB lighting is included in a black frame. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Saturn 12 FRGB a quiet fan?
AeroCool rates it at 19.6 dB(A) at its fixed 1000 RPM, which is a low noise figure on paper. The data does not list measured noise in real systems, so actual perception depends on your case and mounting.
What is the AeroCool Saturn 12 FRGB best used for?
With 35.8 CFM airflow and 1.31 mmH2O static pressure at 1000 RPM, it suits general case intake or exhaust and mesh panels. The modest pressure figure makes it less ideal for dense radiators or heavily restricted intakes.
Does the Saturn 12 FRGB fit a standard 120mm mount and how is it powered?
Yes, it is a 120mm fan with 25mm thickness, matching standard 120mm case and cooler spacing. It uses a Molex plus 3-pin connector, so it can run from a power supply or a motherboard header.















