| Model | Mirage 12 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1300–1300 RPM |
| Max airflow | 45.7 CFM |
| Max pressure | 1.52 mmH₂O |
| Max noise | 17.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Mirage 12 ARGB is a 120 mm 25 mm black fan rated 1300 RPM 45.7 CFM and 1.52 mmH2O 17.8 dBA with ARGB lighting
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Mirage 12 ARGB Fan
The AeroCool Mirage 12 ARGB is a 120mm fan with a 25mm thickness, so it fits standard 120mm case and cooler mounting points. Its 45.7 CFM airflow and 1.52 mmH2O static pressure put it in balanced territory: it moves a decent volume of air for case ventilation, while the modest static pressure means it is better suited to open case airflow than to pushing through dense radiators or thick dust filters. Buyers should not expect it to be a high-pressure radiator specialist.
Noise is rated at 17.8 dB(A) at a fixed 1300 RPM, which is a low figure on paper, though the data does not list a PWM range or a minimum speed. The hydraulic bearing is listed as the bearing type. The 6-pin ARGB connector is specific to ARGB control, so check that your motherboard or controller supports that header before buying. The fan is black with ARGB lighting. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Mirage 12 ARGB quiet?
AeroCool rates it at 17.8 dB(A) at 1300 RPM, which is a low noise figure on paper. The data does not list a lower minimum speed, so the fan appears to run at a fixed 1300 RPM.
What is the AeroCool Mirage 12 ARGB best for?
With 45.7 CFM airflow and 1.52 mmH2O static pressure, it suits 120mm case ventilation and general airflow. The modest static pressure makes it less ideal for dense radiators or thick filters.
What connector does the Mirage 12 ARGB use?
It uses a 6-pin ARGB connector, so you need a compatible ARGB header or controller. Check your motherboard or fan controller supports that connection before buying, since it is not a standard 4-pin PWM header.















