| Model | Saturn 12F ARGB Pro 3Pack |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1000–1000 RPM |
| Max airflow | 35.8 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 19.6 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin ARGB + H66F hub |
| Lighting | ARGB |
| Colour | Black |
Saturn 12F ARGB Pro 3Pack is a 120 mm 25 mm black fan rated 1000 RPM 35.8 CFM and 1.31 mmH2O 19.6 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Saturn 12F ARGB Pro 3-Pack Fan
The AeroCool Saturn 12F ARGB Pro 3-Pack uses three 120mm by 25mm fans fixed at 1000 RPM, so there is no PWM range to tune. Each fan moves 35.8 CFM against 1.31 mmH2O of static pressure. That balance suits case ventilation and low-restriction mesh or open-frame builds better than dense radiators or thick dust filters, where higher pressure is usually wanted. At 19.6 dB(A) the noise rating is modest, though the data does not list a measured test setup.
Mounting follows standard 120mm spacing at 25mm thickness, so clearance checks are straightforward. Note the connector: each fan uses a 6-pin ARGB connection plus the included H66F hub, so plan cable routing around the hub rather than a plain motherboard header. Lighting is ARGB in a black frame with hydraulic bearings. The data does not list a price or release year, so confirm those with the retailer before buying.
Frequently asked questions
Is the AeroCool Saturn 12F ARGB Pro 3-Pack quiet?
AeroCool rates each fan at 19.6 dB(A) at its fixed 1000 RPM. The data does not list a test method or distance, so treat that figure as a manufacturer rating rather than a measured room result.
What is the Saturn 12F ARGB Pro 3-Pack best for?
With 35.8 CFM and 1.31 mmH2O at 1000 RPM, it suits case airflow and low-restriction mesh setups. Dense radiators or thick filters usually favor higher static pressure than this rating provides.
What connector does the Saturn 12F ARGB Pro 3-Pack use?
Each fan uses a 6-pin ARGB connector plus the included H66F hub. Plan your cable routing and ARGB control around that hub, since the fans do not use a standard 4-pin PWM header.















