| Model | Mirage 12 ARGB Pro 3Pack |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1300–1300 RPM |
| Max airflow | 45.7 CFM |
| Max pressure | 1.52 mmH₂O |
| Max noise | 17.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin ARGB + hub |
| Lighting | ARGB |
| Colour | Black |
Mirage 12 ARGB Pro 3Pack is a 120 mm 25 mm black fan rated 1300 RPM 45.7 CFM and 1.52 mmH2O 17.8 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Mirage 12 ARGB Pro 3-Pack Fan
The Mirage 12 ARGB Pro 3-Pack uses 120mm by 25mm fans that run at a fixed 1300 RPM, with no lower speed range listed. That single speed delivers 45.7 CFM of airflow and 1.52 mmH2O of static pressure, so the fans lean toward open case ventilation and low-restriction mesh or grille mounting rather than thick, dense radiators where higher pressure is usually wanted. The rated noise is 17.8 dB(A), which suggests a quiet result at that fixed speed, though the data does not list a measured test condition.
Each fan uses a hydraulic bearing and a 6-pin ARGB plus hub connector, so plan the ARGB and fan wiring around the included hub rather than a standard 4-pin PWM header. The 25mm thickness fits most standard 120mm mounts, and the black frame with ARGB lighting suits dark builds. The data does not list a price or release year, so check the retailer for current pricing and availability.
Frequently asked questions
Is the AeroCool Mirage 12 ARGB Pro 3-Pack quiet?
The manufacturer rates each fan at 17.8 dB(A) at its fixed 1300 RPM speed. That is a low figure, but the data does not list the test distance or conditions, so treat it as a manufacturer rating rather than a guarantee.
What is the AeroCool Mirage 12 ARGB Pro 3-Pack best for?
With 45.7 CFM and 1.52 mmH2O at 1300 RPM, it suits case ventilation through mesh or open grilles. The static pressure is modest, so the data does not position it for dense radiators or heavily restricted intakes.
Does the AeroCool Mirage 12 ARGB Pro 3-Pack fit standard 120mm mounts?
Yes, each fan is 120mm in diameter and 25mm thick, a common size for 120mm case and cooler mounts. Wiring uses a 6-pin ARGB plus hub connector, so confirm your setup supports the included hub.















