| Model | Phantom M-3 12 PWM ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 50.2 CFM |
| Max pressure | 1.44 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Phantom M-3 12 PWM ARGB is a 120 mm 25 mm black fan rated 500-1800 RPM 50.2 CFM and 1.44 mmH2O 30.8 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Phantom M-3 Fan
The AeroCool Phantom M-3 is a 120mm, 25mm-thick ARGB fan built around a 500–1800 RPM PWM range. Its 50.2 CFM airflow and 1.44 mmH2O static pressure put it in balanced territory: it moves a decent volume of air for case ventilation, while the modest pressure figure means it is better suited to open case airflow than to pushing through dense radiators or thick dust filters. At full speed the rated noise is 30.8 dB(A), so expect audible airflow at 1800 RPM and quieter operation toward the 500 RPM floor.
Mounting uses standard 120mm 25mm spacing, and the fan combines a 4-pin PWM connector for speed control with a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs both headers. The hydraulic bearing is the only bearing detail listed. Colour is black. The manufacturer data does not list a price or release year, so check current retail listings for cost and availability.
Frequently asked questions
Is the AeroCool Phantom M-3 quiet at full speed?
The rated noise is 30.8 dB(A) at its 1800 RPM maximum, so it is audible under load. Because it is PWM-controlled down to 500 RPM, you can lower the speed for quieter everyday operation.
Is the Phantom M-3 better for case airflow or radiators?
With 50.2 CFM airflow and 1.44 mmH2O static pressure, it is a balanced fan that suits case ventilation well. The modest pressure rating makes it less ideal for dense radiators or restrictive filters.
What connectors does the Phantom M-3 need for PWM and ARGB?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both a PWM fan header and an ARGB header.















