| Model | Astro 12F ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1000–1000 RPM |
| Max airflow | 42.1 CFM |
| Max pressure | 1.68 mmH₂O |
| Max noise | 17.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Astro 12F ARGB is a 120 mm 25 mm black fan rated 1000 RPM 42.1 CFM and 1.68 mmH2O 17.5 dBA with ARGB lighting
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Astro 12F ARGB Fan
The AeroCool Astro 12F ARGB is a 120mm fan with a 25mm frame that runs at a fixed 1000 RPM, so there is no PWM range to tune. Its 42.1 CFM airflow and 1.68 mmH2O static pressure suit open case ventilation and low-restriction mesh or vented panels better than dense radiators or thick dust filters, where higher pressure fans are usually preferred. The rated 17.5 dB(A) suggests a quiet, low-speed character, though the data does not list a measured test result.
Mounting follows the standard 120mm, 25mm-thick format, so it fits common case and cooler positions. The connector is listed as 6-pin ARGB, which is not a standard 4-pin PWM or 3-pin header, so check that your motherboard or controller supports that connection before buying. The hydraulic bearing is specified for the fan, and the colour is black with ARGB lighting. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Astro 12F ARGB quiet?
AeroCool rates it at 17.5 dB(A) at its fixed 1000 RPM speed. That is a low published figure, but the data does not include independent noise measurements, so treat it as the manufacturer rating only.
What is the Astro 12F ARGB best used for?
With 42.1 CFM and 1.68 mmH2O static pressure at 1000 RPM, it suits case ventilation and low-restriction mesh panels. Dense radiators or thick filters typically call for higher static pressure than this fan lists.
Does the 6-pin ARGB connector fit my motherboard?
The data lists a 6-pin ARGB connector, not a standard 4-pin PWM or 3-pin ARGB header. Confirm your motherboard or AeroCool controller has that 6-pin connection before purchase, since the fan runs at a fixed 1000 RPM.















