| Model | GF120 ARGB PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1600 RPM |
| Max airflow | 66.3 CFM |
| Max pressure | 1.55 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
GF120 ARGB PWM is a 120 mm 25 mm black fan rated 800-1600 RPM 66.3 CFM and 1.55 mmH2O 25.5 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH GF120 ARGB PWM Fan
The MONTECH GF120 ARGB PWM is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. Its 66.3 CFM airflow at up to 1600 RPM suits case intake and exhaust duty, while the 1.55 mmH2O static pressure is modest, so it is better for open airflow paths than for pushing through dense radiators or restrictive filters. The 800 RPM minimum lets you run it slowly at idle.
Noise is rated at 25.5 dB(A), which is a moderate figure for a fan of this airflow class, though the data does not state the test distance or speed. The hydraulic bearing is listed without an MTBF or warranty figure. It connects by 4-pin PWM for speed control plus a separate 3-pin ARGB header, so your board needs both. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH GF120 ARGB PWM quiet?
Montech rates it at 25.5 dB(A), a moderate noise level for a 120mm fan reaching 66.3 CFM. The data does not specify the test distance or the exact speed used for that rating, so treat it as a manufacturer figure only.
Is the GF120 ARGB PWM good for a radiator or CPU cooler?
Its 1.55 mmH2O static pressure is modest, so it is better suited to case airflow than to dense radiators or heavily filtered intakes. The 66.3 CFM airflow at up to 1600 RPM works well for open intake and exhaust positions.
What connectors does the MONTECH GF120 ARGB PWM need?
It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs both headers, and the 25mm thickness fits standard 120mm mounting points.















