| Model | RX120 PRO 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 72.3 CFM |
| Max pressure | 1.85 mmH₂O |
| Max noise | 27.8 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
RX120 PRO 3in1 is a 120 mm 25 mm white fan rated 600-1600 RPM 72.3 CFM and 1.85 mmH2O 27.8 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH RX120 PRO 3-in-1 Pack White Fan
The MONTECH RX120 PRO White is a 120mm, 25mm-thick fan running from 600 to 1600 RPM via a 4-pin PWM connector. Its 72.3 CFM airflow is the headline figure, so it suits case ventilation and open-airflow mounting where moving volume matters more than pushing through dense fins. Static pressure is listed at 1.85 mmH2O, which is modest, so buyers using thick radiators or tightly packed heatsinks should weigh that number carefully rather than assume radiator performance.
Noise is rated at 27.8 dB(A), a figure to read as the manufacturer's rating rather than a measured result. The Sleeve Bearing is a simple, low-cost bearing type, and the data does not list a lifespan or warranty figure. A separate 3-pin ARGB connector handles lighting alongside the 4-pin PWM cable, so your board or controller needs an ARGB header. The white colour and ARGB lighting are the visual selling points; the data does not list a price or release year.
Frequently asked questions
Is the MONTECH RX120 PRO White quiet enough for a quiet build?
Montech rates it at 27.8 dB(A), with a 600 RPM minimum speed via PWM. The data does not list measured noise at specific RPM points, so treat 27.8 dB(A) as the manufacturer rating and check the minimum-speed behaviour in your own setup.
Is the RX120 PRO White better for case airflow or radiators?
Its 72.3 CFM airflow is high relative to a 1.85 mmH2O static pressure rating, so it is better suited to case ventilation and low-restriction mounting. For thick radiators or dense heatsinks, the modest static pressure figure is the limiting number to consider.
What connectors does the MONTECH RX120 PRO White need?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard or fan controller therefore needs both a PWM fan header and an ARGB header, or a compatible ARGB hub, for full control.















