| Model | GF120 ARGB PWM |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1600 RPM |
| Max airflow | 66.3 CFM |
| Max pressure | 1.55 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
GF120 ARGB PWM is a 120 mm 25 mm white fan rated 800-1600 RPM 66.3 CFM and 1.55 mmH2O 25.5 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH GF120 ARGB PWM White Fan
The GF120 ARGB PWM White is a 120mm, 25mm-thick fan with a 800–1600 RPM range. Its 66.3 CFM airflow and 1.55 mmH2O static pressure make it a balanced choice: the airflow figure suits open case ventilation and rear exhaust, while the moderate static pressure can handle lightly restrictive filters or mesh, though it is not a high-pressure radiator specialist. At a listed 25.5 dB(A) maximum, expect the fan to be audible at full speed but modest at lower PWM duty.
Mounting is standard 120mm with 25mm thickness, so it fits common case and cooler positions. The 4-pin PWM connector allows speed control from a motherboard header, and the separate 3-pin ARGB connector needs an ARGB header or controller for lighting. The hydraulic bearing is listed for the fan. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the MONTECH GF120 ARGB PWM White quiet?
The manufacturer lists a maximum noise of 25.5 dB(A) at up to 1600 RPM. Because it is PWM controlled down to 800 RPM, you can lower the speed for less noise, though the data does not list noise at lower speeds.
What is the GF120 ARGB PWM White best for?
With 66.3 CFM airflow and 1.55 mmH2O static pressure, it suits case intake and exhaust and lightly restrictive filters. It is not a high-static-pressure fan, so the data does not support claiming it as a radiator specialist.
Does the MONTECH GF120 ARGB PWM White fit my case?
It is a standard 120mm fan with 25mm thickness, so it fits common 120mm case and cooler mounts. It uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so your motherboard or controller needs an ARGB header.















