| Model | METAL PRO 12 ARGB PWM |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 76.2 CFM |
| Max pressure | 3.81 mmH₂O |
| Max noise | 29.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
METAL PRO 12 ARGB PWM is a 120 mm 28 mm black fan rated 600-2200 RPM 76.2 CFM and 3.81 mmH2O 29.1 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH METAL PRO 12 ARGB PWM Fan
The MONTECH METAL PRO 12 ARGB PWM is a 120 mm fan with a 28 mm frame, slightly thicker than the common 25 mm design, so check clearance at the mounting point before fitting it. Its 600–2200 RPM range spans quiet idle running and high-speed load use, and the listed 76.2 CFM airflow with 3.81 mmH2O static pressure suits both open case ventilation and resistance-heavy placements such as heatsinks or radiators, where pressure matters more than raw airflow.
At full speed the rated noise is 29.1 dB(A), so expect the loudest operation at the top of the range and quieter running near 600 RPM. The Fluid Dynamic Bearing is the stated bearing type. Connection is a 4-pin PWM header for speed control plus a separate 3-pin ARGB header for lighting, so the board needs both. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH METAL PRO 12 ARGB PWM quiet?
The manufacturer rates it at 29.1 dB(A), which is the figure at its maximum 2200 RPM. Because the fan starts at 600 RPM, you can run it slower through PWM control for quieter operation, but the data does not give noise levels for lower speeds.
Is this fan better for a radiator or for case airflow?
It lists 3.81 mmH2O static pressure and 76.2 CFM airflow, so it is specified for both roles. The higher pressure figure makes it a candidate for radiators and dense heatsinks, while the airflow rating suits general case ventilation.
What connectors and size does the MONTECH METAL PRO 12 ARGB PWM need?
It is a 120 mm fan with a 28 mm thickness, so confirm your case or cooler has room for the extra depth over a standard 25 mm fan. It uses a 4-pin PWM connector plus a separate 3-pin ARGB connector for the lighting.















