| Model | METAL PRO 12 ARGB PWM |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 76.2 CFM |
| Max pressure | 3.81 mmH₂O |
| Max noise | 29.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
METAL PRO 12 ARGB PWM is a 120 mm 28 mm white fan rated 600-2200 RPM 76.2 CFM and 3.81 mmH2O 29.1 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH METAL PRO 12 ARGB PWM White Fan
The MONTECH METAL PRO 12 ARGB PWM White is a 120 mm fan with a 28 mm thickness, so it is slightly deeper than standard 25 mm models and needs a little extra clearance at the mounting point. Its 76.2 CFM airflow and 3.81 mmH2O static pressure make it a strong candidate for heatsinks, radiators and mesh-fronted cases where resistance is high, while the 600 to 2200 RPM PWM range lets you dial speed down for everyday use. Montech rates noise at 29.1 dB(A), which is the figure to expect near the top of that range rather than at idle.
A 4-pin PWM connector handles fan speed control, and a separate 3-pin ARGB connector drives the lighting, so your motherboard needs an ARGB header or a compatible controller. The fluid dynamic bearing is the bearing type Montech lists for this model. Buyers should note that the data does not list a price, release year, warranty length or included accessories, so those details need confirming with the retailer before ordering.
Frequently asked questions
Is the MONTECH METAL PRO 12 ARGB PWM White quiet?
Montech rates this fan at 29.1 dB(A), and the 600 RPM minimum lets you run it slowly for quieter operation. The data does not list a separate noise figure for low speeds, so expect the 29.1 dB(A) rating to apply near the 2200 RPM maximum.
What is the MONTECH METAL PRO 12 ARGB PWM White best for?
With 76.2 CFM airflow and 3.81 mmH2O static pressure, it suits radiators, dense heatsinks and restrictive case fronts where pressure matters. The 28 mm thickness means checking clearance, since it is deeper than a standard 25 mm fan.
What connectors does the MONTECH METAL PRO 12 ARGB PWM White need?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin ARGB connector for the lighting. Your motherboard or controller therefore needs both a PWM fan header and a 3-pin ARGB header to use speed control and lighting together.















